ECCOSORB SS Tapes

ECCOSORB SS Tapes

HIGH TACK PRESSURE SENSITIVE ADHESIVE (PSA) TAPES

Caratteristiche del prodotto
Caratteristiche e Benefici
  • ECCOSORB® SS-tapes are very high tack pressure sensitive adhesive (PSA) tapes specifically designed for use with Emerson & Cuming Microwave Product’s absorbers
  • There are several PSA’s offered:
    • ECCOSORB® SS6M for silicone absorbers
    • ECCOSORB® SS3 for urethane absorbers
    • ECCOSORB® SSV for vinyl materials
    • ECCOSORB® SS9 for ECCOSTOCK® PP
  • ECCOSORB® SS-tapes are cleanly cut with steel roll dies or via water-jet cutting
Esempi di applicazioni
  • ECCOSORB® SS-tapes are used throughout many applications where high bond reliability and UV resistance is required
  • ECCOSORB® SS-tapes are ideally suited for applications such as commercial microwave devices where the speed and convenience of a peel and stick adhesive is desired
  • ECCOSORB® SS6M has been shown effective in applications involving shock and vibration, temperature cycling and high humidity
  • Adhesion testing with SS6M was also performed with material attached to a housing at 200 °F for 24 hours, mounted at 90°, and heated to 300 °F for 24 hours. No slouching was seen and bond strength is excellent!
  • In general longer residence time yields higher peel values
Disponibilità
  • ECCOSORB® SS-tapes are factory installed, which utilize a proprietary process resulting in a superior adhesive bond. When applied in this manner, bond strength is far superior when compared to those adhesives applied to the material after its manufacture
Istruzioni per l’uso
  • Simply peel the release paper off of the adhesive backing and apply
  • The use of heat and pressure will help to increase the initial bond of the material to the substrate. Surfaces to be bonded should be cleaned, dry, and free from grease and oil
  • ECCOSORB® SS3 and SS6M should not be bonded to any material that may contain migrating plasticizers, rather SSV should be used
Proprietà
 SS6MSS3SS9SSV
Adhesive TypeAcrylicAcrylicSynthetic RubberAcrylic
Adhesive Carrier0.5 mil Polyester0.5 mil Polyester4.0 mil Polyethylene0.5 mil Polyester
Tape Thickness4.5 mils4.5 mils45.7 mils3.1 mils
Peel adhesion to steel (lb./inch width)4.74.7–4.7
Tensile Strength, lb./in.1010–10
Elongation60%60%–60%
Typical Service Temperature, °F (°C)-40 to 250

(-40 to 121)

-40 to 250

(-40 to 121)

30 to 150

( -1.1 to 66)

-40 to 250

(-40 to 121)

Material TypeSilicone AbsorberUrethane AbsorberECCOSTOCK® PPVinyl

Data for design engineer guidance only. Observed performance varies in application.
Engineers are reminded to test the material in application.

RICHIEDI INFORMAZIONI

SCHEDA PRODOTTO

CERTIFICAZIONI

Salva prodotto

RICHIEDI INFORMAZIONI

Scrivi qui per ulteriori richieste / informazioni

Ai sensi e per gli effetti degli artt. 7, 12, 13 ss. del Reg. UE 2016/679 - GDPR

dichiaro di aver preso visione dell’ Informativa Privacy di EURO TECHNOLOGIES SRL per il trattamento dei miei dati personali (contatti e richiesta preventivi, finalità A) *

Informativa Privacy finalità B

(* campo obbligatorio)

VIDEO

Prodotti correlati

Catalogo generale - Euro Technologies

CATALOGO GENERALE

Euro Technologies propone una vasta selezione di prodotti. All’interno del catalogo generale vengono descritte, per ciascuna gamma, le caratteristiche e le specifiche tecniche e i benefici, le varianti disponibili e le possibili applicazioni.

Scarica ›

Italiano