ECCOSORB® SS Tapes

ECCOSORB SS Tapes

HIGH TACK PRESSURE SENSITIVE ADHESIVE (PSA) TAPES

Specific product Characteristics
Features&Benefits
  • ECCOSORB® SS-tapes are very high tack pressure sensitive adhesive (PSA) tapes specifically designed for use with Emerson & Cuming Microwave Product’s absorbers
  • There are several PSA’s offered:
    • ECCOSORB® SS6M for silicone absorbers
    • ECCOSORB® SS3 for urethane absorbers
    • ECCOSORB® SSV for vinyl materials
    • ECCOSORB® SS9 for ECCOSTOCK® PP
  • ECCOSORB® SS-tapes are cleanly cut with steel roll dies or via water-jet cutting
Typical application
  • ECCOSORB® SS-tapes are used throughout many applications where high bond reliability and UV resistance is required
  • ECCOSORB® SS-tapes are ideally suited for applications such as commercial microwave devices where the speed and convenience of a peel and stick adhesive is desired
  • ECCOSORB® SS6M has been shown effective in applications involving shock and vibration, temperature cycling and high humidity
  • Adhesion testing with SS6M was also performed with material attached to a housing at 200 °F for 24 hours, mounted at 90°, and heated to 300 °F for 24 hours. No slouching was seen and bond strength is excellent!
  • In general longer residence time yields higher peel values
Availability
  • ECCOSORB® SS-tapes are factory installed, which utilize a proprietary process resulting in a superior adhesive bond. When applied in this manner, bond strength is far superior when compared to those adhesives applied to the material after its manufacture
Instructions for use
  • Simply peel the release paper off of the adhesive backing and apply
  • The use of heat and pressure will help to increase the initial bond of the material to the substrate. Surfaces to be bonded should be cleaned, dry, and free from grease and oil
  • ECCOSORB® SS3 and SS6M should not be bonded to any material that may contain migrating plasticizers, rather SSV should be used
Product properties
 SS6MSS3SS9SSV
Adhesive TypeAcrylicAcrylicSynthetic RubberAcrylic
Adhesive Carrier0.5 mil Polyester0.5 mil Polyester4.0 mil Polyethylene0.5 mil Polyester
Tape Thickness4.5 mils4.5 mils45.7 mils3.1 mils
Peel adhesion to steel (lb./inch width)4.74.7–4.7
Tensile Strength, lb./in.1010–10
Elongation60%60%–60%
Typical Service Temperature, °F (°C)-40 to 250

(-40 to 121)

-40 to 250

(-40 to 121)

30 to 150

( -1.1 to 66)

-40 to 250

(-40 to 121)

Material TypeSilicone AbsorberUrethane AbsorberECCOSTOCK® PPVinyl

Data for design engineer guidance only. Observed performance varies in application.
Engineers are reminded to test the material in application.

ASK FOR INFORMATION

PRODUCT SPECIFICATIONS

CERTIFICATIONS

Save product

ASK FOR INFORMATIONS



I authorize the treatment of the personal data inserted here, in agreement with Dlgs.196/03

VIDEO

Related Products

GENERAL CATALOGUE

Euro Technologies offers a wide selection of products. Inside the general catalogue are described, each range, including its features and benefits, specifications, the available variants and possible applications.

Download ›

English